Slitting Line Machines steel coil slitting line slitting machine from China manufacturer

Slitting Line Machines steel coil slitting line slitting machine

Place of Origin:

Jiangsu, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: ZJX-3X1250

Automatic Slitting Line Machine For Coil Sheet 3mm Thick , 1600mm Width

Automatic Slitting Line Machine For Coil Sheet 3mm Thick , 1600mm Width

Application:CR/HRC/stainless steel /galvanized
thickness of coil plate:0.3-3mm
width of coil plate:1600mm
coil weight:15MT(max)
line speed:0-120m/min

Specifications:

Application:	CR/HRC/stainless steel /galvanized and so on
thickness of coil plate:	0.5-3mm
width of coil plate:	1250mm
coil weight:	10MT(max)
coil I.D:	508
coil O.D:	1600mm
the diameter of slitting blade shaft	180
slitting blade:	Φ180Xφ320X20
material of slitting blade:	6Crw2Si
the hardness of slitting blade:	HRC58°-60°
recoiler I.D:	φ508
power:	380V/50Hz/3Ph
tolerance of width error:	≤±0.05mm/2M
line speed	0-100m/min
area of the whole machine:	30m(L)x6m(W)
Production orientation	from left to right

ZJX-0.5-3X1250mm full automatic slitting line is used for slitting the carbon plate to prepare for the next process.

1. Hydraulic entry coil car

The car can move levelly and vertically, which is convenient for putting the steel coils into the de-coiler.

It is driven vertically by hydraulic cylinder with four guide pillars.

The level movement is driven by 1.5KW cycloidal motor.

2. Hydraulic cantilever un-coiler

Supporting steel rolls and uncoiling.

It can expand and shrink with hydraulic oil cylinder and fit with the inner hole of the steel coils and is equipped with supporting stand.

Moment motor drives the coils running and the motor can run right and left to prevent the coils running by inertia.

3. Hydraulic press and pinch and feed device

Two hydraulic oil cylinders control the lifting of rollers.

Hydraulic telescopic shovel and hydraulic press and hit the head device, etc to feed the plate.

Hydraulic pinch and feed device: driven by the cycloid pinwheel decelerator and equipped with hand clutch. The pinch rollers adopt the hydraulic oil cylinder to press down. It is driven by down rollers.

4. Hydraulic head-cutting machine

Adopt two columns structures, a press device, can cut the 3mmX1300 steel plates;

The up and down blades whi